Fire safety signage is a critical component of building compliance and occupant protection. However, many Perth businesses unknowingly make signage errors that could lead to failed inspections, fines, or worse—risk during an actual emergency. Below, we outline five of the most common mistakes and how to avoid them.

1. Poor Visibility & Obstruction

Signage must be visible at all times—without exception. Common issues include:

  • Signs blocked by furniture or fittings – such as fire extinguisher signs hidden behind shelves.
  • Low-light conditions – particularly in stairwells or underground car parks, where signs without illumination or photoluminescence fail visibility standards.
  • Improper height placement – signs placed too high, too low, or away from common sightlines can go unnoticed.

Best Practice: Ensure all signs are mounted at consistent, visible heights and angles. Use reflective or illuminated signage where required. Regularly audit pathways and ensure no obstructions block safety signage.

2. Incorrect Sign Placement

Even high-quality signage fails inspection if installed in the wrong location. Typical placement errors include:

  • Fire extinguisher signs located far from the actual unit
  • Exit signs pointing in the wrong direction or failing to indicate multiple routes
  • Evacuation diagrams placed too far from primary foot traffic zones

Incorrect placement not only fails compliance but endangers occupants by causing confusion during evacuation.

Best Practice: Position signs directly above or adjacent to the associated Fires safety equipment Perth installations and ensure all directional signage corresponds accurately with real-life egress paths.

3. Outdated or Non-Compliant Signage

Using signage that is faded, damaged, or non-compliant with current Australian Standards (AS 1319 and AS 3745) can lead to immediate inspection failure. This includes:

  • Old exit signs lacking directional arrows
  • Signs without appropriate pictograms
  • Lack of photoluminescent material in emergency signs

Signage must be reviewed every time the building layout changes, new safety equipment is installed, or legislation is updated.

Best Practice: Maintain a signage register as part of your building’s fire compliance plan and conduct a full signage audit annually.

4. Lack of Multilingual or Universal Symbols

In multicultural workplaces, relying solely on English text creates comprehension risks. Staff and visitors may not be able to read or understand crucial instructions in emergencies.

Common issues:

  • No symbol-based signs in high-traffic or public areas
  • Evacuation instructions without diagrams
  • Verbal-only instructions without visual backup

Best Practice: Choose signage that incorporates internationally recognised symbols, pictograms, and diagrams. Where applicable, offer multilingual signs—especially in public buildings, aged care facilities, or sites with diverse personnel.

5. Failure to Maintain & Inspect Signage

Signs, like any safety equipment, degrade over time. Yet many businesses neglect to check their fire safety signs Perth for:

  • Fading due to sun exposure
  • Peeling or cracked backing
  • Loose fittings or dislodged signs

Unmaintained signage is not only non-compliant but can render your fire plan ineffective in critical moments.

Best Practice: Integrate signage checks into your routine fire equipment maintenance schedule. When inspecting extinguishers, hose reels, or alarms, include a visual inspection of associated signage and replace any that fail visibility or legibility checks.

Conclusion

Fire signage is not a passive fixture—it is a critical safety and compliance tool. Poorly maintained, misplaced, or outdated signage can lead to serious inspection consequences, fines, or endangerment during real-life emergencies.

To avoid these costly mistakes, businesses in Perth should treat signage as an active part of their Fires safety equipment Perth compliance strategy—reviewed, inspected, and maintained with the same rigour as extinguishers and alarms.

author avatar
FX Services Australia